Use Mstick via Web Browser (Mstick BrowserView)
An upgraded BrowserView (Beta) feature has been released, taking the existing [Mirror to Phone] function of the Mgears Go app to the next level.
◆ Enjoy Mstick on a large, clear screen using any device with a web browser—such as a PC or Tesla vehicle—without installing any additional apps.
◆ Fully supported on the Tesla in-vehicle browser.
◆ BMW users, who previously had difficulty using the Mgears Go app, can now view and use Mstick via a smartphone browser.
1. How to Connect BrowserView
[Using Mstick4 on a PC Browser]
1. Use the Mgears Go smartphone app to connect Mstick4 to the same Wi-Fi network as your PC.
2. Open a PC browser and visit find.mgears.link, then select your Mstick4 to display the screen.
※ Please connect Mstick4 to a standard USB power source.
※ If Mstick4 is connected to a vehicle, it will not appear on find.mgears.link.
[Viewing Mstick4 on a Smartphone in BMW Vehicles]
1. Insert a SIM card into Mstick4 and turn on the Mstick4 hotspot. Check the hotspot name and password.
2. Connect your smartphone to the Mstick4 hotspot.
3. Open a smartphone browser and visit view.mgears.link to view the Mstick4 screen.
※ For vehicles other than BMW, please use the [Mirror to Phone] feature in the Mgears Go app to view the Mstick screen.
2. Screen Control & Settings (Quick Menu)
Tap the BrowserView display to open the Quick Menu (☰) at the top of the screen.
◆ Settings: Adjust BrowserView display and audio settings.
◆ Full Screen: Hides the browser UI and switches to full-screen mode.
※ Not supported on iPhone and Tesla vehicles.
◆ Upload: Transfer files from the connected device to Mstick.
※ Not supported on Tesla vehicles.
3. Tesla Vehicle Guide
You can also use Mstick4 in Tesla vehicles via BrowserView.
[Connection Steps]
1. Insert a SIM card into Mstick4 and enable the hotspot. Check the hotspot name and password.
2. Connect the Tesla vehicle to the Mstick4 hotspot.
3. Open the Tesla browser and visit view.mgears.link to display the Mstick4 screen.
4. On the Tesla display, go to Controls → Software → Data Sharing, then turn OFF any unnecessary data sharing options.
※ If data sharing is not disabled, several GB of mobile data may be consumed in a short time.
※ Vehicles with Tesla HW versions lower than 4.0 may not function properly.
※ Functionality may be limited without prior notice due to manufacturer policies or software updates.
※ For stable operation of Mstick4, using a USIM is recommended. Smartphone hotspot usage may result in limited functionality or reduced performance.
[Tips for Tesla Users]
◆ Use the BrowserView Navigation Bar
On the Tesla browser BrowserView page:
Quick Menu (☰) → Settings → Turn Navigation Bar ON and select its position.
[Troubleshooting Connection Issues]
◆ Depending on the Tesla firmware version, the following settings may be required.
① Video / Audio Settings
On the Tesla browser BrowserView page:
Quick Menu (☰) → Settings → Apply the following settings, then refresh the browser.
· Audio: Wi-Fi Audio Output OFF
· Video: Decoder Type – Software (SW)
② Change Mstick Vehicle Connection Mode
On the Mstick screen:
Mgears Settings → Device Settings
· Vehicle Connection Mode: BMW Mode
· Bluetooth Audio Profile: Source Mode
(Audio output to vehicle speakers: OFF)
③ Bluetooth Connection
After completing the above settings, connect Mstick via the Tesla vehicle’s Bluetooth settings.
4. Notes on Microphone & Speaker Operation
◆ Since BrowserView operates via a web browser, it uses the microphone and speaker of the device running the browser (PC, smartphone, or vehicle).
· Operating principle: Audio input and output follow the browser’s connected devices.
· Example: When set to Vehicle Microphone (Android Auto operating mode / non-standard mode) in a Tesla vehicle, the built-in Tesla microphone will be used.
◆ The Screen / Audio Sync Adjustment feature remains available while using BrowserView.